Markforged Kinematics V2.0 for FlyingBear Ghost 5
Version 2.0 of the Markforged kinematics conversion for the FlyingBear Ghost 5.
Go to files |  |  |
About this project
Version 2.0 of the Markforged kinematics conversion for the FlyingBear Ghost 5. The downloads include STEP files and separate STL archives labelled Motor Y In and Motor Y Out.
Additional components to purchase
| Component | Quantity |
|---|---|
| F623ZZ flanged bearing (3 × 10 × 4) | 4 |
| GT2 20T W6 B4 pulley (18 × 8.5 × 12) | 4 |
| GT2 belt, 6 mm wide (length 1280 mm+) | 1 |
| M3 brass heat-set insert (D4.6 × L5.7) | 32 |
| Pin, D2 mm × L15 mm | 2 |
| Pin, D3 mm × L15 mm | 2 |
| Pin, D4 mm × L16 mm | 2 |
| Pin, D4 mm × L20 mm | 1 |
| Pin, D4 mm × L25 mm | 3 |
| Hex socket screw M3 × 5 mm | 14 |
| Hex socket screw M3 × 10 mm | 12 |
| Hex socket screw M3 × 15 mm | 11 |
| Hex socket screw M3 × 16 mm | 2 |
| Hex socket screw M3 × 30 mm | 2 |
| Cone-point hex socket screw M3 × 8 mm | 2 |
Cura print settings
| Setting | Value |
|---|---|
| Nozzle | 0.4 mm |
| Layer height | 0.15 mm |
| Line width | 0.4 mm |
| Infill line width | 0.45 mm |
| Wall thickness | 2 mm |
| Top/bottom thickness | 2 mm |
| Infill | 30% |
| Infill pattern | Cubic |
| Connect Infill Lines | Enabled |
| Print speed | 30–50 mm/s |
License & attribution
© 2022, the 3Diwell team. This model is licensed under Creative Commons Attribution–NonCommercial 4.0 International (CC BY-NC 4.0).
A note from the 3Diwell team
We would appreciate it if you could take a moment to rate our projects. If you enjoyed them, it means we are more than just people with a printer — we are making things that actually work.
A five-star rating inspires us to explore new ideas and achieve more. And a review saves our team from melancholy after reprinting the same part for the 37th time.
With thanks and a calibrated extruder,
Your 3Diwell team, still believing in the power of reviews…
Rate our projects and leave a review
Support our projects
To support this project, visit its original project page (Russian).
Files
STEP.zip9.0 MBSTL Motor Y In.zip3.9 MBSTL Motor Y Out.zip3.8 MBPlease check the project license and requirements before using these files.
Original project page RU ↗